ampage
Tube Amps / Music Electronics
For current discussions, please visit Music Electronics Forum. New: view Recent Searches.
New: visit Schematic Hell!
The sunn still shines online!

 
Listen to great tunes streaming live right now!

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  
previous: ken gilbert q{The center tap of the autoformer ... -- 5/2/2000 11:22 PM View Thread

Re: Long answer to: Cathode Follower Questions

5/3/2000 4:12 PM
Morris
Re: Long answer to: Cathode Follower Questions
First of all, thanks to Ken for taking the time to answer my questions. I will definitely be grounding the center tap of the autoformer (because I'll be cathode biasing the EL84's) so that should work well. If I use a 6SN7 for my gain stage/cathode follower, would making the cathode resistor on the follower the same as the plate resistor on the gain stage do the job if the B+ to both comes from the same source? I really just want a ballpark starting point so I can tweak from there. Also, any ideas on a good size for the coupling capacitor from the follower? Thanks again.  
 
Morris