previous: Lars How does that voltage divider netwo... -- 4/19/2000 7:50 AM

Re: Switch for humbucking and single coil

4/20/2000 5:15 AM

Steve A.

Re: Switch for humbucking and single coil Lars:     The design was from Bruce Collins but I tried different value resistors to ground for the #2 input. You can see it drawn up in schematic form and in a layout drawing at my site under the Hot Rod Tweed...     http://www.ampage.org/blueguitar/hrt_lay1.gif     http://www.ampage.org/blueguitar/hrt_sch1.gif       (I had asked Bruce about Hi and Low input jacks with the 33k grid stopper mounted right on the tube socket and not the input jacks after trying to draw up something myself...)     Bruce's drawing is available as:     http://www.ampage.org/blueguitar/input.gif       Steve Ahola