ampage
Tube Amps / Music Electronics		 For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  

 

Switch for humbucking and single coil

4/18/2000 8:14 AM
Nils
Switch for humbucking and single coil
Hi,  
 
Has anyone tried with different values on the resistors in the first stage to even out the differences in the pickups output signal.  
 
In other words if a humbucker with x output need 1k5 ohms cathode resistor then a single coil with y output would need a 820 ohms resistor.  
 
Would it be possible to make a switch like this?  
 
Nils

 
Replies:
Lars Yes you can do it, but do it like t... -- 4/18/2000 1:57 PM
Doc Steve A. has developed a simple inp... -- 4/18/2000 4:18 PM