| ampage Tube Amps / Music Electronics |
For current discussions, please visit Music Electronics Forum. |
ampage archive
Vintage threads from the first ten years
| previous: ADM What's the easiest way to cut G-10 ... -- 4/15/2000 8:05 PM |  |
|---|
Re: Which Materials for Turret Boards
 4/15/2000 8:27 PM |
||
Gil Ayan | Re: Which Materials for Turret Boards
You know, I built 3 amps -- wach with quite a few boards -- and never had any problem using this cheap jigsaw I bought at Home Depot. I use a metal cutting blade. However, I have a friend who's ahving a hell of a time cutting his, so I am not sure what the problem might be. What I do is use a thin-tip Sharpie to draw the lines where I want to cut the bugger, and I go for it. My saw is variable speed, and I found that slow speed and a little forward pressure is the way to go. IF the edges feel a little sharp once you're done, use sandpaper to smooth it out. Gil | |
|---|---|---|
| Replies: |
| Graydon Stuckey q{What's the easiest way to cut G-1... -- 4/15/2000 8:56 PM andy fuchs I like plastic like Teflon (when yo... -- 4/15/2000 8:57 PM MJ Harnish I've also used a powered jigsaw wit... -- 4/15/2000 10:40 PM Bryan Prud'Homme Gil, I have the feeling that I may ... -- 4/17/2000 5:27 AM |