ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

previous: MBSetzer Re: how do you draw the schematics? -- 3/15/2000 1:58 AM

Davis106 mp3's

3/20/2000 2:27 AM
MBSetzer	Davis106 mp3's Now that I've changed it to sound more like a guitar amp, I posted two more sound clips. The amp is all the way up, the first clip is clean using both humbuckers with the guitar volumes about 2 - 3. The second clip is with everything the same except the guitar volumes maxed, neck PU about the first 20 seconds then the bridge PU after that. http://members.aol.com/setzeramp/setz106a.mp3 http://members.aol.com/setzeramp/setz106b.mp3 Let me know and I will get a drawing of this posted, it will be a bit different than the stock amp, I can always add the voltages later after its completely finished. Mike

3/20/2000 2:27 AM

MBSetzer

Davis106 mp3's

Now that I've changed it to sound more like a guitar amp, I posted two more sound clips. The amp is all the way up, the first clip is clean using both humbuckers with the guitar volumes about 2 - 3. The second clip is with everything the same except the guitar volumes maxed, neck PU about the first 20 seconds then the bridge PU after that.

http://members.aol.com/setzeramp/setz106a.mp3

http://members.aol.com/setzeramp/setz106b.mp3

Let me know and I will get a drawing of this posted, it will be a bit different than the stock amp, I can always add the voltages later after its completely finished.

Mike