ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

previous: Dan D. Jason, Gus,Will Do!... -- 1/4/2000 5:28 AM

Re: Fender HR Stopped Switching Channels

1/6/2000 5:55 AM
Johnny99	Re: Fender HR Stopped Switching Channels Hi guys! I have the same problem and I haven't been able to lick it yet. All solder joints are good. The amp stopped switcing channels then started, the stopped for good. Same thng as Dan's, no reverb when no switching, just the normal channel worked. My voltages are: CR13 -.64v R78 -.64v I went to U3 (4560) and took readings on the pins: TP36 (pin1) -16.5v TP35 (pin2) -.5v TP34 (pin3) -12.27v TP33 (pin7) -1.4v TP32 (pin6) 9.97v Any help would be appreciated!! Johnny99

1/6/2000 5:55 AM

Johnny99

Re: Fender HR Stopped Switching Channels

Hi guys!

I have the same problem and I haven't been able to lick it yet. All solder joints are good. The amp stopped switcing channels then started, the stopped for good. Same thng as Dan's, no reverb when no switching, just the normal channel worked. My voltages are:
CR13 -.64v
R78 -.64v
I went to U3 (4560) and took readings on the pins:
TP36 (pin1) -16.5v
TP35 (pin2) -.5v
TP34 (pin3) -12.27v
TP33 (pin7) -1.4v
TP32 (pin6) 9.97v

Any help would be appreciated!!
Johnny99

Replies:

jason It looks like you -16vdc is good. C... -- 1/6/2000 2:40 PM