ampage
Tube Amps / Music Electronics		 For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  

 

previous: Jim Radmer Hmm, I tried tapping the whole boar... -- 1/3/2000 8:05 PM view thread

Re: (still) Marshall amp problems

1/4/2000 5:54 PM
Deltablues
Re: (still) Marshall amp problems
If the 5210 has the same design as the earlier 4210's, these are well known for developing broken solder joints on the volume and control pots since they soldered them directly to the pcb instead of using flying leads. If you've reflowed those joints you might consider swapping out the Master Vol. pot altogether...

 
Replies:
Jim Radmer Re: noise sound online! -- 1/5/2000 5:19 PM