Tube Amps / Music Electronics
For current discussions, please visit Music Electronics Forum. New: view Recent Searches.
New: visit Schematic Hell!
The sunn still shines online!

Listen to great tunes streaming live right now!

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  
previous: Carl Z Steve;One other opt... -- 8/24/1999 2:42 AM View Thread

Re: Roll your own chassis?

8/24/1999 1:22 PM
Steve Jones
Re: Roll your own chassis?
I got a bid from a local sheet metal shop if that is the same thing. The bid came in at $125 and that was without spot welding the corners which they said would add another $75 or so. That's a bit out of my ball park (way out actually). I'm still waiting on another bid, but I don't expect it to be drastically different. That's why I decided to try and make my own. The problem with this chassis is it has a sloped front which is a little more complicated than just a box. Thanks,  

R.G. Sheet metal shops vary *a lot* in w... -- 8/24/1999 2:23 PM
Bruce The most I've paid for a prototype ... -- 8/24/1999 4:19 PM
Nick Dolling I made my own from 1.6mm brass. I s... -- 8/30/1999 5:50 AM