ampage
Tube Amps / Music Electronics
For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  

Fan Supply Question

8/8/1999 5:59 PM
Pat FFan Supply Question
I want to tap off my 6.3VAC filament supply to build a DC power supply for a cooling fan on my AC-30 clone. I have lifted the ground for the AC filament supply and have 100 ohm resistors from each side going to ground. If I build a bridge rectifier, tap off each side of the AC filament supply and attached the ground of the bridge rectifier to the chassis ground, will this interfere with the phantom ground created by the 100 ohm resistors between the AC filament supply and ground?

 
Replies:
ken gilbert q{I want to tap off my 6.3VAC filam... -- 8/8/1999 8:55 PM