ampage
Tube Amps / Music Electronics
For current discussions, please visit Music Electronics Forum. New: visit Schematic Hell!
 
The sunn still shines online!

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  
previous: JaySG "Tweed mixer" could be more like th... -- 10/16/2000 1:34 AM View Thread

Re: Anybody added reverb to their D'Clone...?

10/16/2000 1:59 AM
Steve A.
Re: Anybody added reverb to their D'Clone...?
Jay:  
 
    Thanks! So the two signals (after the twin triodes) are summed up with a pair of 100k resistors going to the .02uF coupling cap. I was wondering about using a single- or dual-ganged linear pot to blend the two signal... but you'd need to add in blocking caps ahead of the pots to keep DC off the pots.  
 
    So if you didn't want to add any more gain to your amp, I guess you could wire up the two triodes as cathode followers- right? Might be a fun experiment to try...  
 
Steve Ahola

 
Replies:
JaySG If you want gain, you can use one c... -- 10/16/2000 2:21 AM
Bruce I think the dry and wet signal is m... -- 10/16/2000 4:35 AM