Tube Amps / Music Electronics
|For current discussions, please visit Music Electronics Forum.||New: view Recent Searches.
New: visit Schematic Hell!
The sunn still shines online!
|Listen to great tunes streaming live right now!|
|previous: Dodge Hi folks!||View Thread|
|7/28/2000 7:22 PM|
|Rick Erickson||Re: Favourite Fender Master Volume Circuit|
You might try the old dual 1M pot after the p/i trick.
I put a couple of these in Plexi Marshals recently (no I didn't drill any holes) for the guitarists in a local band. They like them and say it retains the general character of the amp but allows them to turn the level down on stage. I used .047uF caps on both sides of the pot. (oops, I did drill four tiny holes in the terminal board to install flea-clip terminals for the extra two caps). On a Fender you could probably add a terminal strip held down by the eyelet board mount screw. If you want to get massive distortion you will either need to modify the preamp circuit or forger the MV and use a good distortion pedal. My preference is the pedal.
|Peter S I'm with Rick on this....if you sim... -- 7/29/2000 12:48 AM|
Steve A. Rick: