ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

previous: Don Symes Any advice on blade selection for b... -- 7/17/2000 12:22 AM

Re: Speaker cabinet part construction

7/17/2000 12:38 AM
Casey4s	Re: Speaker cabinet part construction "Any advice on blade selection for best results?" The idea is to use a blade that has a lot of teeth to get as smooth of a cut as possible, and narrow (shortest distance from the teeth to the back edge of the blade)This allows to cut in an arc more easily, and turn corners without binding. Like anything, practice is the key, you can cut these freehand with good results, after a little practice. Casey4s

7/17/2000 12:38 AM

Casey4s

Re: Speaker cabinet part construction

"Any advice on blade selection for best results?"

The idea is to use a blade that has a lot of teeth to get as smooth of a cut as possible, and narrow (shortest distance from the teeth to the back edge of the blade)This allows to cut in an arc more easily, and turn corners without binding. Like anything, practice is the key, you can cut these freehand with good results, after a little practice.

Casey4s