ampage
Tube Amps / Music Electronics
For current discussions, please visit Music Electronics Forum. New: view Recent Searches.
New: visit Schematic Hell!
The sunn still shines online!

 
Listen to great tunes streaming live right now!

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  
previous: Dave I am trying to build the Shaka 5, a... -- 10/23/2000 6:46 PM View Thread

Re: I need help wiring pots on the Shaka 5

10/23/2000 9:51 PM
aron
email
Re: I need help wiring pots on the Shaka 5
This page may help you:  
 
http://hail-eris.com/~stompbox/pedals/pitfalls.html  
 
Let's look at the first example, the drive pot. B and A connect to the two OUTER lugs and the B side is connected to the wiper (i.e. middle lug).  
 
The tone pot, C (outer lug) is connected to the junction of the .1 and 33K resistor.  
 
The D (other outer lug) is connected to the junction of the 22K and .0039 (.004) cap.  
 
The wiper (middle lug) goes to the outer lug of R14, the wiper of R14 goes to the output jack, the other outer lug goes to ground.