ampage
Tube Amps / Music Electronics
For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  
previous: JMF Since this circuit is starting to g... -- 10/17/2000 1:11 AM view thread

Re: Bob's octave fun

10/17/2000 5:29 PM
Dan
Re: Bob's octave fun
I've done 2 mods to my octaver. The first mod is to put a 0.1 uf poly cap between the V+ and the ground. It should be as close as possible to the actual chip, ideally straddling it from the V+ on the one side to the V- / ground on the other. This prevents oscillation and lowers the amount of noise. The second mod is to add an extra gain control, the traditional LM386 style. Connect the positive side of a 10 uf 16 V electrolytic to pin 8 and connect a 100K pot between the negative side of the cap and pin 1. With this mod, you can really give is a hell of an output boost, plus more easily change just how fuzzy the signal is. Hope that's of some help.  
-Dan

 
Replies:
aron Thanks for the mods Dan!... -- 10/17/2000 5:51 PM
Eric H q{The second mod is to add an extra... -- 10/17/2000 8:19 PM
Joe Gagan Hey, Alien Dan, I did your mod and ... -- 10/18/2000 5:31 AM