ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

previous: aron Please describe the switch again. P... -- 8/16/2000 4:27 AM

Re: Help with EH LPB-2

8/16/2000 1:04 PM
Phil	Re: Help with EH LPB-2 Hi Aron, Sleep beckoned. Here's the blow by blow on the switch. The - from the battery is connected to the top (outside) lug of the switch. The middle lug has an orange/white/red/gold resistor attached that is comming off the right leg of the transistor. Also attached to the middle lug is a red/black/yellow(i think)/gold resistor. This is soldered to a green rectangle(?) with 154K 100V on it and a white/red/white/gold resistor. These then go to the middle leg of the transistor. Nothing is connected to the bottom outside lug of the switch. Thanks, Phil

8/16/2000 1:04 PM

Phil

Re: Help with EH LPB-2

Hi Aron,
Sleep beckoned. Here's the blow by blow on the switch. The - from the battery is connected to the top (outside) lug of the switch. The middle lug has an orange/white/red/gold resistor attached that is comming off the right leg of the transistor. Also attached to the middle lug is a red/black/yellow(i think)/gold resistor. This is soldered to a green rectangle(?) with 154K 100V on it and a white/red/white/gold resistor. These then go to the middle leg of the transistor. Nothing is connected to the bottom outside lug of the switch.

Thanks,
Phil

Replies:

Petri Junno As I said on my previous post, I th... -- 8/16/2000 1:49 PM