ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

previous: Phil 1st off, let me say that I know jus... -- 8/15/2000 7:47 PM

Re: Help with EH LPB-2

8/15/2000 8:22 PM
aron	Re: Help with EH LPB-2 Phil, A golden chance to learn more! OK, one way - look carefully on the board - there should be a hole (filled - maybe with a little wire sticking out) that the wire came out from. That's probably the one you need to re-attach the wire to. OK, the other way: Look for a 10K and a 470K resistor on the board. How do you find them? There are only 4 resistors on the board. Here's how you decipher the wonderful world of resistors: ------ You should be able to identify basic components such as resistors,http://webhome.idirect.com/~jadams/electronics/identify.htm">resistors, HREF="capacitors," target="_blank">http://webhome.idirect.com/~jadams/electronics/identify.htm">capacitors, diodes," target="_blank">http://webhome.idirect.com/~jadams/electronics/identify2.htm">diodes, transistors and integrated circuits. You should be able to read resistor values. Resistor color codes and primer is here" target="_blank">http://webhome.idirect.com/~jadams/electronics/resistor_codes.htm">here and here. " target="_blank">http://www.elfa.se/images/ct_hires/A13412_1.JPG">here. -------- Find out where the 2 resistors connect (i.e. touch) each other and that's where the plus lead (POWER) goes. If you look at the schematic, this becomes clearer. http://www.montagar.com/~patj/ehbsters.gif Also check out this page. http://firebottle.net/stompbox/skills.html Aron

8/15/2000 8:22 PM

aron

Re: Help with EH LPB-2

Phil,

A golden chance to learn more!

OK, one way - look carefully on the board - there should be a hole (filled - maybe with a little wire sticking out) that the wire came out from. That's probably the one you need to re-attach the wire to.

OK, the other way:

Look for a 10K and a 470K resistor on the board. How do you find them? There are only 4 resistors on the board.

Here's how you decipher the wonderful world of resistors:

------

You should be able to identify basic components such as
resistors,http://webhome.idirect.com/~jadams/electronics/identify.htm">resistors,
HREF="capacitors," target="_blank">http://webhome.idirect.com/~jadams/electronics/identify.htm">capacitors,
diodes," target="_blank">http://webhome.idirect.com/~jadams/electronics/identify2.htm">diodes,
transistors and integrated circuits.

You should be able to read resistor values. Resistor
color codes and primer is here" target="_blank">http://webhome.idirect.com/~jadams/electronics/resistor_codes.htm">here
and here.

" target="_blank">http://www.elfa.se/images/ct_hires/A13412_1.JPG">here.

--------

Find out where the 2 resistors connect (i.e. touch) each other and that's where the plus lead (POWER) goes.

If you look at the schematic, this becomes clearer.

http://www.montagar.com/~patj/ehbsters.gif

Also check out this page.

http://firebottle.net/stompbox/skills.html

Aron

Replies:

aron Awe shucks...After ... -- 8/15/2000 8:24 PM