| ampage Tube Amps / Music Electronics |
For current discussions, please visit Music Electronics Forum. |
ampage archive
Vintage threads from the first ten years
Neutron schem/layout differences.
 6/30/2000 2:04 AM |
|
chuck | Neutron schem/layout differences. i put my neutron together and it doesn't work. w/ the effect on, i get no wha effect, only a slight eq diffence. gain knob works, but everything else doesn't do much. i was worried about CJ's dual LDR being in wrong, but i checked it and its wired right and reading 1.8v w/ the + being on the correct (left) side. i checked all the wireing over and over and its all right w/ the layout. i went to the the schematic in the instructions and started noticeing small differences which leads me to think this is the problem. for example: the schem has (4) 22k resistors while the layout has (3) 1/2 of the up/down switch on the schematic just shorts the wire, but on the layout it switch's it to a diffent part of the board maybe im missing something though. the only other thing that worried me is that i have nothing wired to the bypass of the board, since i did it tru bypass, but i can't see why that would matter thanks for your help, chuck |
|---|---|
| Replies: |
| R.G. That board's been built a number of... -- 6/30/2000 3:40 AM |