ampage
Tube Amps / Music Electronics		 For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  

 

previous: R.G. q{If you eliminate the 100ohm resis... -- 6/16/2000 9:02 PM view thread

Re: Next Puzzler

6/16/2000 9:21 PM
Jeff
Re: Next Puzzler
RG, check your schematic.  
 
quote:
"Actually, I left the "down" side 100 ohm alone, lifted the ground side of the "up" 100 ohm, and put a 470uF cap to ground on the former ground side. It's AC, not DC grounded"
 
 
This would provide no usable bias for the diodes as the schematic is drawn.  
 
Should the control be hooked to the right side, to the "up" diode? It is shown hooked to the "down" diode.