ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

previous: bburns75 The KS 69 parts layout on Lazyfinge... -- 5/11/2000 9:00 PM

Re: Stumped by KS 69

5/11/2000 10:24 PM
Stuart	Re: Stumped by KS 69 where does -9V connect? At the junction of the 33K resistor and the contour pot. ...input wired to the wiper of the bias pot with a jumper to the 1M resistor then to ground. Is that correct? Similar question about the volume pot... Correct. One more question - what's that hole for between the solder point for terminal 1 of the volume pot and the .1 uf capacitor? That hole seems to be redundant. Note: the 220K resistor on the layout should be 220R.

5/11/2000 10:24 PM

Stuart

Re: Stumped by KS 69

where does -9V connect?

At the junction of the 33K resistor and the contour pot.

...input wired to the wiper of the bias pot with a jumper to the 1M resistor then to ground. Is that correct? Similar question about the volume pot...

Correct.

One more question - what's that hole for between the solder point for terminal 1 of the volume pot and the .1 uf capacitor?

That hole seems to be redundant.

Note: the 220K resistor on the layout should be 220R.