ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

previous: Ed Guidry I etched a new board, the old board... -- 5/11/2000 12:07 PM

Re: debugging sweet thing (jfets)

5/11/2000 4:25 PM
Doug	Re: debugging sweet thing (jfets) Another thing, Ed. Don't mean to nitpick here, but perhaps I didn't explain it good enough the first time. You should buzz out the board -before- you install the components. Just simply check that pads that should be connected are connected, and ones that shouldn't, aren't. You should check any questionable looking traces, especially ground traces that may be edged up against some pads where they shouldn't, etc... Doug

5/11/2000 4:25 PM

Doug

Re: debugging sweet thing (jfets)

Another thing, Ed. Don't mean to nitpick here, but perhaps I didn't explain it good enough the first time. You should buzz out the board -before- you install the components. Just simply check that pads that should be connected are connected, and ones that shouldn't, aren't. You should check any questionable looking traces, especially ground traces that may be edged up against some pads where they shouldn't, etc...

Doug

Replies:

Ed Guidry I checked everything out pretty goo... -- 5/11/2000 4:41 PM