ampage
Tube Amps / Music Electronics
For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  
previous: Mark Hammer The schematic can be found at Jack ... -- 8/24/2000 8:43 PM view thread

Re: Jack Ormanīs Dr. Quack

8/28/2000 6:45 PM
Tiago
Re: Jack Ormanīs Dr. Quack
Youīre right Mark! I changed the resistor to 2,2M and thereīs sound and wah. But itīs too "poppy" and "cracky". I only can use with a overdrive or distortion. With clean sound itīs a shit. I have a Boss ME-10 and used the effect between the guitar and the ME-10. I only can use this way, if I put the Quack after, the sound becomes crappy. And with clean sound when thereīs much signal (when I pluck hard the strings) the treble is with very pops and cracks.  
 
There is a difference between ceramic and polyester caps in the sound? I used polyester, should I change it to ceramic? I used too 0,047 and 0,0047 uF instead 0,05 and 0,005 uF thatīs in the schematic.  
 
I hope someone can help me.  
 
Tiago