ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

previous: Mark Hammer The Dr. Q is fussy about op-amps, a... -- 8/2/2000 1:58 PM

Re: Envelope Controlled Filter using tubes?

8/2/2000 4:29 PM
jon	Re: Envelope Controlled Filter using tubes? Mark So... is the purpose of that lower portion of the circuit to grab a very small bit of the signal and store it on the 10uF cap, and then mix it back with the dry (sort of) signal? I tried unsuccessfully the other PM to do something similar with a tube but I bet I had way too much swing...maybe I won't have to build up a SS one after all..... cya, Jon

8/2/2000 4:29 PM

jon

Re: Envelope Controlled Filter using tubes?

Mark
So... is the purpose of that lower portion of the circuit to grab a very small bit of the signal and store it on the 10uF cap, and then mix it back with the dry (sort of) signal? I tried unsuccessfully the other PM to do something similar with a tube but I bet I had way too much swing...maybe I won't have to build up a SS one after all.....
cya,
Jon