| ampage Tube Amps / Music Electronics |
For current discussions, please visit Music Electronics Forum. |
ampage archive
Vintage threads from the first ten years
| previous: Liam Having spent a few years modifying ... -- 5/27/2000 2:45 PM |  |
|---|
Re: PCB Manufacture
 5/27/2000 3:09 PM |
|
Jim Martin | Re: PCB Manufacture Liam: I would think that imaging the circuit pattern is the most difficult part. If double sided, how would connect the circuit through the board? I guess you could insert an eyelet through the copper trace but they would have to be lined up perfectly on both sides. Then, solder the trace to the eyelet when soldering in the component. Never done this, just guessing here. In PCB production, the hole drilled through the board is made conductive and copper plated. Then, the image is etched into the copper surface. If you have a few one offs I could help you and make the hole conductive and copper plate, too. Can't help in the imaging dept though. But I do have access to etching chemistries. If you have a few to do maybe I can help. Can't do production volume. E-mail me if you want. |
|---|---|
| Replies: |
| Daniel R. Haney Jim Martin wrote: |