ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

previous: Mike No luck. I even tried driving the V... -- 1/16/2000 12:48 AM

Re: Volume Pedal De-Scratcher

1/22/2000 4:08 PM
Mark Hammer	Re: Volume Pedal De-Scratcher No particular advice to offer, but I can say that I have built it and the schematic is accurate. Not sure what kind of 3080 you are using, but sometimes the legs on the metal can ones don't sit perfectly in the chip socket, so you may want to check the seating, or even time the legs a bit tomake the fit snugger, if you are using the metal can version. Just a thought. Do get it working, though, since it is a nice smooth sweep.

1/22/2000 4:08 PM

Mark Hammer

Re: Volume Pedal De-Scratcher

No particular advice to offer, but I can say that I have built it and the schematic is accurate. Not sure what kind of 3080 you are using, but sometimes the legs on the metal can ones don't sit perfectly in the chip socket, so you may want to check the seating, or even time the legs a bit tomake the fit snugger, if you are using the metal can version.

Just a thought. Do get it working, though, since it is a nice smooth sweep.