Tube Amps / Music Electronics
For current discussions, please visit Music Electronics Forum. New: view Recent Searches.
New: visit Schematic Hell!
The sunn still shines online!

Listen to great tunes streaming live right now!

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  
previous: Max Hi everybody!I was wonderin... -- 12/28/1999 1:43 AM View Thread

Re: opto device in compressor?

12/28/1999 6:17 PM
Scott Swartz
Re: opto device in compressor?
I see you are still interested in a tube based compressor. I am continuing to work on the optical design I mentioned a few weeks ago, and plan to make it available on the net in some manner, perhaps with a PC board from RG for the side chain circuitry. I will contact RG about this after the design is proven. He may or may not be interested in this.  
I can't tell how your idea in the post is supposed to work. What is the side chain? A normal compressor has a level detector that outputs a DC control voltage which is controlling the gain. This is where the ratio and threshold are set.  
On your photoresistor question, the response time of the photoresistor is probably the most critical parameter, but resistance range also is important. Check out this link for some good info:  
This is the company that makes "Vactrols" - used to be EG & G, now its someone called Perkin Elmer Optoelectronics.  
If you want to start your own design, I would recommend that you purchase the book "The Stompbox Cookbook" by Nicholas Boscorelli, as it has a lot of good compressor ideas that can be modified to incorporate tube gain stages.  
This book is available here:  
PS Thanks to Aron and his board for telling me about this book and a source for it. This book was also recently added at Antique Electronic Supply