ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

previous: Jsh DIP's? Ah.. ok that is what I meant... -- 12/16/1999 6:46 PM

Re: The original thoughts

12/16/1999 6:59 PM
Jsh	Re: The original thoughts I tried to see if we could get away with some series of A/B switching boxes. The LS-2 of Boss does A/B switching. Putting a second A/B switcher in the B loop of the first one, gives you the opportunity to switch between 3 FX's without much trouble. But then you can't use FX 1 and FX 3 TOGETHER. [This could be expanded to higher numbers, but then it will get a little harder to switch without thinking (the last part is prefered, if you consider you are PLAYING rather then switching)] Those H11F#'s, are they silent in switching? And what happens by lower power values? Are they easy to get? How could they be held in the "on" position, when you use a temperary Footswitch? Are we needing a relay then? The CD 4053 seems to have the same problem. Using a DPDT footswitch per program, looks like trouble. How are we going to reset the first Footswitch when the second is being pressed (calling up an other program)? CMOS-chips can do this? kind regards, Jsh

12/16/1999 6:59 PM

Jsh

Re: The original thoughts

I tried to see if we could get away with some series of A/B switching boxes.

The LS-2 of Boss does A/B switching. Putting a second A/B switcher in the B loop of the first one, gives you the opportunity to switch between 3 FX's without much trouble. But then you can't use FX 1 and FX 3 TOGETHER. [This could be expanded to higher numbers, but then it will get a little harder to switch without thinking (the last part is prefered, if you consider you are PLAYING rather then switching)]

Those H11F#'s, are they silent in switching? And what happens by lower power values? Are they easy to get?

How could they be held in the "on" position, when you use a temperary Footswitch? Are we needing a relay then?

The CD 4053 seems to have the same problem. Using a DPDT footswitch per program, looks like trouble. How are we going to reset the first Footswitch when the second is being pressed (calling up an other program)?

CMOS-chips can do this?

kind regards,

Jsh

Replies:

R.G. Ok, take a look at http://www.eden.... -- 12/16/1999 7:27 PM