ampage
Tube Amps / Music Electronics		 For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  

 

previous: jc I built a Wha circuit board using a... -- 12/8/1999 7:51 PM view thread

Re: Can't Get Wha to Work

12/8/1999 8:19 PM
Joe Fuzz
Re: Can't Get Wha to Work
JC: Just a couple of guesses but:  
 
1) Check the harness. Compare it with the diagram on the Fulltone site (if applicable).  
 
2) Connect an ohmmeter between the two pads that the inductor is soldered to. In other words, 2 legs go to one pad, the other 2 legs go to another pad. What does it read between those two separate pads?