ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

previous: R.G. Good idea, and good insight into so... -- 10/29/1999 1:15 PM

Re: 3 or 4 out signal splitter

10/29/1999 2:12 PM
pHiL	Re: 3 or 4 out signal splitter R.G., Thanks for the info. Yes, I was planning on making my own routing boxes. I have plenty of Carling DPDT and even a few of Mike Fuller's 3PDT switches laying around. All of the effects including the time based ones are stompboxes running off a common 9v supply (Signalflex), and the built in 9v supply on one of those B.C Rich effects switching pedal boards. The amps are: BFSR, SFDR, and a SFBMR... all have 3-prong power chords and will most likely run off a common power source. I was hoping that I might be able to get away with just isolating all the jacks from the chassis enroute to the amps but I guess that's not the case. Which is why I posted here! Thanks again, pHiL

10/29/1999 2:12 PM

pHiL

Re: 3 or 4 out signal splitter

R.G.,

Thanks for the info.

Yes, I was planning on making my own routing boxes. I have plenty of Carling DPDT and even a few of Mike Fuller's 3PDT switches laying around.

All of the effects including the time based ones are stompboxes running off a common 9v supply (Signalflex), and the built in 9v supply on one of those B.C Rich effects switching pedal boards.

The amps are: BFSR, SFDR, and a SFBMR... all have 3-prong power chords and will most likely run off a common power source.

I was hoping that I might be able to get away with just isolating all the jacks from the chassis enroute to the amps but I guess that's not the case. Which is why I posted here!

Thanks again,

pHiL

Replies:

R.G. Yeah, the real problem is twofold:<... -- 10/29/1999 5:52 PM