ampage
Tube Amps / Music Electronics
For current discussions, please visit Music Electronics Forum. New: view Recent Searches.
New: visit Schematic Hell!
The sunn still shines online!

 
Listen to great tunes streaming live right now!

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  
  View Thread

Found out how to give a marshall a lot of bass

4/15/1999 1:59 PM
j burt
email
Found out how to give a marshall a lot of bass
on my '78 1959 head i put a .033uF cap on the 100k feedback resistor and woah!! i didnt know i could get that much bass out of this amp!! it sounds good too! i put a 100uf cap over the 2.7k input resistor, i changed the slope resistor to 47k and that's about it!i had the slope resistor at 56k but i thought it would be too much with the cap on the feedback resistor. my bass pot actually does something now

 
Replies:
Trace Jburt; Well good for you! ... -- 4/15/1999 2:43 PM
Dave Stork By putting that cap across the feed... -- 4/15/1999 11:16 PM
RJH I've used O'Connor's "resonance" co... -- 4/17/1999 10:10 AM
TMiller on my '78 1959 head i put a .033uF ... -- 4/29/1999 11:39 AM