Tube Amps / Music Electronics
|For current discussions, please visit Music Electronics Forum.||New: visit Schematic Hell!
The sunn still shines online!
|11/23/1998 3:58 PM|
|Pascal||AC-15 plate voltage|
I'm thinking of building a AC-15/Berkely clone as is featured in the schematic section on Ampage. I'm choosing this because it is a simple circuit and I have many parts that will be salvaged from a 2 X 6BQ5 stereo I found in the garbage. I'm wondering what the ideal plate voltage would be for this amp, also, what would be a cheap alternative for an output tranny that could handle the two 6BQ5 tubes into an 8 ohm load? I'm living in Canada so mail order from the USA is kind of prohibitive due to our low dollar... are there any Mouser equivalents in Canada? Thanx...
|Carlo Pascal...I'm not sure about the Mou... -- 11/23/1998 11:29 PM|
steve k Hi,, Just finished up a similar amp... -- 11/24/1998 5:55 AM
SpeedRacer Should run at 320V for best results... -- 11/24/1998 10:32 AM
Benjamin Fargen Pascal, I built a Spitfire clone th... -- 11/24/1998 10:58 AM