ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

AWA PA-100B

2/11/1998 6:04 PM
Darren	AWA PA-100B Hi Guys, I recently aquired an old AWA Valve PA amp in working condition and have been thinking about modifying it for use as a guitar or bass guitar amp. Luckily it has the circuit printed on the lid so that should be of assistance, it is rated at 100W, but curiously only uses 2 KT88 tubes as outputs, anyway, what i was wondering is, has anyone else out there ever seen/used/ or modded one of these amps? If so, i would be very interested in your thoughts..... Oh yeah, and by the way, it was made in Australia too, so i wont be surprised if it is unkown outside of here Darren

2/11/1998 6:04 PM

Darren

AWA PA-100B

Hi Guys,
I recently aquired an old AWA Valve PA amp in working condition and have been thinking about modifying it for use as a guitar or bass guitar amp. Luckily it has the circuit printed on the lid so that should be of assistance, it is rated at 100W, but curiously only uses 2 KT88 tubes as outputs, anyway, what i was wondering is, has anyone else out there ever seen/used/ or modded one of these amps? If so, i would be very interested in your thoughts.....

Oh yeah, and by the way, it was made in Australia too, so i wont be surprised if it is unkown outside of here

Darren

Replies:

Bill Bolton > it is rated at 100W, but curiousl... -- 2/11/1998 6:26 PM
RPD You may find useful, a faq somewher... -- 2/12/1998 12:40 AM