| ampage Tube Amps / Music Electronics |
For current discussions, please visit Music Electronics Forum. |
ampage archive
Vintage threads from the first ten years
| previous: Steve K Well here is the final word on my A... -- 10/29/1997 6:01 AM |  |
|---|
Re: DIY AC30 feedback
 11/10/1997 1:00 AM |
|
Colin | Re: DIY AC30 feedback I'm interested to hear about your experience with your AC30 circuit. I'm about to start building the same thing, but just the output stage and not the preamp part. This is because I intend to use the JMP-1 MIDI programmable preamp which I have as the front end of the amplifier. Therefore, the circuit I build will be a phase splitter and output stage. So I'm particularly interested in any comments you may have/helpful hints. eg. What did you use for the OT? I have obtained some thin M6 core material to make a couple of transformers. (I should have mentioned, my intention is to make two of these in one box so that it can run in stereo. Regards Colin |
|---|---|
| Replies: |
| Steve K Hi,, I used a re-issue Vox AC30 |